Personalized photo cube lamps White by day. Your people by night.
Each side of the cube holds one of your photos, 3D-printed as a lithophane. With the light off, the panels look like soft white carvings. Turn the light on and the faces come through in warm detail.
How a photo hides in white plastic
A lithophane turns a photo into thickness. Where your photo is dark, the panel is thick, up to 3 mm. Where it's bright, the panel is thin, down to 0.8 mm.
In daylight you see a white relief. With the candle on inside, the thin spots glow, the thick spots stay in shadow, and the picture appears.
Four photos in a cube, or eight in a Tower
Medium
$59.99- Base
- 5 × 5 in
- Height
- 4.1 in
- Photos
- 4, about 3.3 in each
Large
$84.99- Base
- 6.85 × 6.85 in
- Height
- 5.8 in
- Photos
- 4, about 4.7 in each
Tower
$129.99- Build
- A Medium on a Large
- Height
- about 9.8 in
- Photos
- 8
Photo lid, +$10. One more photo on top. On a Tower it goes on the top cube.
Free shipping in the US, with a light, a remote and USB-C charging cables in every box.
Build a Tower later. Start with one cube and add the other size when you're ready. Tell us when you order and we'll include the stacking lid.
From your phone to a lamp
Pick a size
Choose Medium, Large or Tower on our Etsy listing, and add a photo lid if you like.
Upload your photos
Four for a Medium or Large, eight for a Tower, plus one for a photo lid. No need to pick sides; the panels slide out.
Approve your proof
We send a proof, usually within 1 business day. Approve it or ask for changes.
We make it and ship it
We print every panel, check each one against light, and ship it free.
Clear, bright photos with faces close to the camera work best. Send the original photo, not a screenshot.
No cords on your table
- A rechargeable LED candle sits inside each cube and charges over USB-C.
- One remote turns every light on and off, so both cubes of a Tower light up together.
- To charge, lift the lid, take the light out and plug it in.
Designed and printed in our Edmond office
We designed the cube, the frame and the software that turns your photos into print files. Every panel prints standing up, one thin layer at a time, then snaps off its supports with a clean edge.
- 0.12 mm
- layer height on every photo panel
- 3½ hrs
- to print one Large photo panel
- 0.2 mm
- of room around each panel in its slot, so it slides in snug
- Every panel
- checked against light before it ships
For the people you'd keep a light on for
- Mother's Day
- Grandparents
- Anniversaries and weddings
- New babies
- Pets
- In memory of someone
- Graduations
- Christmas
A Tower works well as a family story: grandparents on the bottom, kids and grandkids on top. New baby, new pet, an anniversary? Order new panels anytime and swap them in yourself in minutes.
Good to know
What is a lithophane?
A photo turned into thickness. We 3D-print each photo as a white panel that's thin where the photo is bright and thick where it's dark. With light behind it, the photo appears.
What photos work best?
Clear, bright photos with faces close to the camera. Use the original photo, not a screenshot. Couples, babies, pets, family groups and memorial photos all work.
How do I send my photos?
Upload them right on the Etsy listing when you order. We send a proof, usually within 1 business day, and we don't print until you approve it.
How long does it take?
We start as soon as you approve your proof and make each order in 5 to 7 business days. Shipping is free in the US.
How does the light work?
Each cube has a rechargeable LED candle that charges over USB-C. The remote turns it on and off without opening the cube, and one remote runs every light, so both cubes of a Tower light up together.
Can I change the photos later?
Yes. The panels slide out from the top. Message us on Etsy for new panels, then swap them in yourself in minutes.
Can I turn one cube into a Tower later?
Yes. A Medium stacks on a Large. When you order your second cube, tell us in the special instructions box and we'll include the stacking lid.
Where should I put it?
Anywhere out of direct sun and hot cars. High heat can soften the frame.
When can I order?
Our photo lamps launch on Etsy in January 2027. Our custom mugs are in the shop now.
A husband-and-wife shop in Edmond, Oklahoma
We're Peter and Tiffani. We've run The Printed Plate on Etsy since 2016, starting with custom mugs. The photo cube is the biggest thing we've made, and we design and print every one ourselves.
We know these aren't just photos. They're your people, your pets and the moments you never want to forget. Thank you for trusting us with them.
Peter & Tiffani